Conductivity Meter
Filter by brand
Extech EC210 Compact Conductivity/TDS Meter
Extech EC210 Compact Conductivity/TDS Meter
Measures Conductivity, TDS and Temperature
Compact handheld Conductivity Meter with long life carbon rod combination electrode measures Conductivity, TDS and Temperature. Units of measure include μS/cm, mS/cm, ppm, °F, and °C. The meter features three ranges for Conductivity and TDS plus adjustable Temperature compensation factor to maintain accuracy.
● Use optional 1413µS Conductivity Standard (EC-1413-P) for calibration
● Complete with Conductivity cell and 39” (1m) cable, 9V battery, and soft case
● Use optional 1413µS Conductivity Standard (EC-1413-P) for calibration
● Complete with Conductivity cell and 39” (1m) cable, 9V battery, and soft case
Extech EC410 ExStik® Conductivity/TDS/Salinity Kit
Extech EC410 ExStik® Conductivity/TDS/Salinity Kit
• Includes EC400 meter with sensor, 3 calibration standards, weighted base, 3 plastic cups, batteries and carrying case
• Autoranging meter offers 3 ranges of measurements from tap water to wastewater and any aqueous solution
• Units of measure include µS/cm, mS/cm, ppm, ppt, mg/L, and g/L
• Adjustable Conductivity to TDS ratio factor from 0.4 to 1.0 – conveniently calculates the TDS value
• Large 3-1/2 digit (2000 count) Digital display with analog bargraph to indicate sample trends
• Data Hold, Auto Power Off and low battery indication
• Automatic Temperature Compensation of 2% per °C
• Simultaneous display of Conductivity, TDS, or Salinity plus Temperature
• Self calibration of electronics on power up
Extech EC505 ExStik® Replacement pH Electrode/Conductivity Cell Module
Extech EC505 ExStik® Replacement pH Electrode/Conductivity Cell Module
– Easy to clean, rugged flat surface pH electrode/conductivity cell module
– Measures Conductivity, TDS, Salinity, pH and Temperature
– Non-interchangeable with ExStik® pH, Chlorine or ORP Meter
– Complete with protective connector cap
– ATC via built-in Pt-100Ohm sensor
Hanna BL-983320 Conductivity Mini Controller
Hanna BL-983320 Conductivity Mini Controller (Rg 199.9 µS/cm)
Pengontrol mini Hanna ini telah dirancang khusus untuk pengondisian air dan aplikasi berkembang. Berukuran kompak, mereka dapat dipasang di ruang terbatas atau bahkan tepat di samping tong atau tong yang berisi bahan kimia.
Pengukuran EC ditampilkan pada layar besar dan LED multi-warna secara terus menerus menunjukkan apakah pengontrol mini dalam mode pengukuran, dosis, atau alarm. BL 983313 mengukur dalam rentang 0 hingga 1999 µS / cm, BL 983320 mengukur dari 0,0 hingga 199,9 µS / cm dan BL 983322 dari 0,00 hingga 19,99 µS / cm.
BL 983320 dilengkapi dengan braket pemasangan, penutup transparan, dan instruksi.
Gunakan Elektroda HI-7640-00(dibeli secara terpisah)
Informasi lebih lanjut tentang produk ini?
Jangan ragu untuk menghubungi kami di 
0813-9895-5475 atau kirim email kepada kami
Hanna BL 983313-1 Conductivity Mini Controller
Hanna BL 983313-1 Conductivity Mini Controller 0 to 1999 µS/cm
Pengukuran dan kontrol konduktivitas Model Pengontrol EC BL983313-1 adalah Pengontrol Konduktivitas ringkas dengan rentang pengukuran 0 hingga 1999 μS/cm dengan akurasi ±2%.Langkah kalibrasi. Hal ini mudah dilakukan dengan Pemangkas di panel depan. Pengguna dapat memilih mode pemberian dosis otomatis atau manual menggunakan tombol di panel depan.
BL 983313-1 Conductivity Mini Controller, 0 hingga 1999 µS / cm, 230V”
● Mudah ditangani
● Casing tahan api
● Sistem perlindungan overdosis yang dapat dipilih
● Penutup tahan percikan
Informasi lebih lanjut tentang produk ini?
Jangan ragu untuk menghubungi kami di 0813-9895-5475 atau kirim email kepada kami
Hanna HI-943500D Conductivity Controller
Hanna HI-943500D Conductivity Controller (Low Range @ 199.9 µS/cm)
Tersedia empat model berbeda dengan rentang pengukuran berbeda, untuk memenuhi segala kebutuhan aplikasi.
Informasi pemesanan:
Seri HI-943500 dilengkapi dengan braket pemasangan dan instruksi.
● HI-943500A: 0,0 hingga 199,9 mS/cm
● HI-943500B: 0,00 hingga 19,99 mS/cm
● HI-943500C: 0 hingga 1999 µS/cm
● HI-943500D: 0,0 hingga 199,9 µS/cm
Informasi lebih lanjut tentang produk ini?
Jangan ragu untuk menghubungi kami di 0813-9895-5475 atau kirim email kepada kami
Lutron YK-22CTA Conductivity/TDS/Salt Meter
Lutron YK-22CTA Conductivity/TDS/Salt Meter
● One meter for one purpose operation: CD, TDS, Salt measurement.
● Conductivity : 200 uS/2 mS/20 mS/200 mS.
● Salt : 0 to 12 % salt (% weight).
● Conductivity measurement can select Temp. Coefficient of measurement solution.
● ATC for the conductivity measurement.
● Complete with : Instruction manual, Conductivity/TDS/Salt probe CDPB-03 1 PC, Hard Case CA-06, Certificate Calibration, Batere kotak 9 Volt
● Optional : 1.413 mS Conductivity Standard solution CD-14, AC to DC 9V adapter, USB cable, USB-01, Data Acquisition software,SWU-801-Win.
Lutron CD-4318SD Precision Conductivity Meter
Lutron TM-947SD 4 Channel Thermo
Innovation and easy operation, computer is not need to setup extra software, after execute datalogger, just take away the SD card from the meter and plug in the SD card into the computer, it can down load the all the measured value with the time information (year/month/date/ hour/minute/second) to the Excel directly, thenuser can make the further data or graphic analysis by themselves
● One meter for multi purpose operation : Conductivity, TDS ( Total dissolved solids ), Salt measurement.
● Conductivity : 20 uS/ 200 uS/2 mS/20 mS/200 mS.
● Salt : 0 to 12 % salt ( % weight ).
● Conductivity measurement can select Temp. Coefficient of measurement solution.
● ATC for the conductivity measurement.
● Complete with : Instruction Manual, Certificate Calibration, Conductivity/TDS/Salt pt glass probe: CDPB-04, Hard carrying case: CA-06, Batere AA , 6 pcs.
Lutron CD-4322 Conductivity Meter
Lutron CD-4322 Conductivity Meter
Applications for Aquarium, Medical research, Agriculture, Fish hatcheries, Laboratory, Water conditioning, Mining industry, Schools & Colleges, Quality control… industry, quality control, school & college, water conditioning.
● 3 measurement range, 2,000 uS, 20 mS, 100 mS with auto range.
● Automatic temperature compensation range : 0 to 50 ℃.
● LCD display, pocket type.
● Automatic temperature compensation.
● Separate probe, easy operation.
● DC 9V battery ( 006P ) or DC 9V adapter in.
● RS-232 interface, Record(max.,min.)
● Complete with : Instruction Manual, Certificate Calibration, Conductivity probe 1 PC,
Lutron CD-4303 Conductivity Meter
Lutron TM-947SD 4 Channel Thermo
Innovative feature with built-in automatic temperature compensation values, adjustable between 0 to 5.0% per ℃. Turning the dial to 0% per ℃ allows you to take uncompensated conductivity readings.
● Circuit : Custom one-chip of micro-processor LSI circuit.
● LCD with display unit.
● Max., Min., Memory recall button.
● 200uS/2mS/20mS, Temperature : ℃, ℉.
● Size : 180 x 72 x 32 mm.
● Complete with : Instruction Manual, Certificate Calibration, Conductivity electrode . 1 PC, Carrying Case 1 PC, Batere kotak 9 Volt
Lutron CD-4301 Conductivity Meter
Lutron CD-4301 Conductivity Meter
Wide applications: water contioning, aquariums, beverage, fish hatcheries, food processing, photography, laboratory, paper industry, plating industry, quality control, school & college, water conditioning.
Measurement & Range : 199.9 uS, 1.999 mS, 19.99 mS, Data Hold.
Resolution :
0.1 uS for 199.9 uS range.
0.001 mS for 1.999 mS range.
0.01 mS for 19.99 mS range.
Accuracy : ± ( 2% F.S. + 1 d )
Complete with : Instruction Manual, Certificate Calibration, Conductivity electrode 1 PC, Carrying Case 1 PC, Batere Kotak 9 Volt.
Lutron BCT-4308 Bench Type Conductivity Meter, TDS
Lutron BCT-4308 Bench Type Conductivity Meter, TDS
● Professional bench type meter with large LCD display with green color backlight, easy reading.
● Two in one : Conductivity and TDS (Total dissolved solids), measurement.
● Conductivity : 200 uS/2 mS/20 mS/200 mS.
● It can select Temp. Coefficient of measurement solution.
● ATC for the conductivity/TDS measurement.
● Real time data logger (record year, month, date, hour, minute, second), 16,000 data logger.
● Complete with : Instruction Manual, Certificate Calibration, Conductivity/TDS Probe BCT-4308.