Icom IC-F1100DT
IDAS™ Features
Seri Icom F1100D menyediakan operasi model digital IDAS berbasis NXDN™ CAI di IDAS konvensional dan multi-situs konvensional. Fitur IDAS berikut tersedia:
- Trunking situs tunggal Tipe-D IDAS™ Type-D
- Pengoperasian mode campuran konvensional analog/digital
vokoder AMBE+2™ - Over-the-Air memperbarui daftar Alias (daftar panggilan) tanpa pemrograman (versi LCD)
- Individu, grup, dan semua panggilan
- Status semua dan polling
- Pesan data singkat (versi LCD)
- Peringatan panggilan
- Pemeriksaan radio (khusus RX)
- Daftar panggilan dapat menyimpan hingga 500 nomor ID untuk sistem pensinyalan IDAS atau MDC1200 untuk ditampilkan dalam nama alias
Fitur Keselamatan & Keamanan
Untuk situasi darurat, seri F1100D menyertakan kunci darurat dan empat fungsi darurat: man down, motion & stationary detection, lone worker, dan fungsi pengawasan.
Seri F1100D juga menyertakan Enkripsi Suara Digital 16 bit tingkat rendah.
Pensinyalan Analog bawaan
Seri F1100 hadir dengan semua pensinyalan analog populer termasuk 2-Tone, 5-Tone, CTCSS dan DTCS untuk komunikasi grup dan panggilan selektif. Fitur MDC termasuk PTT ID, Emergency (TX/RX), Radio Check (RX), Stun (RX), dan Revive (RX).
Fitur tambahan
- Pengumuman saluran
- Suara sirene untuk alarm keamanan
- AquaQuake™ untuk membersihkan air dari panggangan speaker
- Memori panggilan otomatis DTMF
- Fungsi “Shift key” meningkatkan jumlah penetapan kunci yang dapat diprogram
- LED tiga warna
Saluran: |
16 or 128 channels | |
Daya Keluaran: |
5W (VHF & 400-470) / 4W (450-512) | |
Frekuensi: |
136-174 MHz 400-470 or 450-512 MHz |
|
Peringkat tahan air: |
IP67 | |
Tombol yang Dapat Diprogram: |
3 or 7 | |
Versi: |
No display Display with simple keypad Display with full DTMF keypad |
Spesifikasi Icom IC-F1100DT
General
IC-F1100DT/S |
IC-F1100D |
IC-F2100DT/S |
IC-F2100D |
||
|---|---|---|---|---|---|
| Frequency coverage* (*Varies according to version) |
136–174 MHz (NXDN/dPMR) | 350–400 MHz (NXDN, EXP) 400–470 MHz (NXDN/dPMR USA/EUR/EXP) 450–512 MHz (NXDN, USA) 450–520 MHz (NXDN, EXP) |
|||
| Number of channels | 128 channels/ 8 zones | 16 channels | 128 channels/ 8 zones | 16 channels | |
| Type of emission* (*Depending onversion) |
11K0F3E, 4K00F1E, 4K00F1D (USA) | ||||
| 16K0F3E, 14K0F3E, 11K0F3E, 8K50F3E, 4K00F1E, 4K00F1D (EXP) | |||||
| 16K0F3E, 14K0F3E, 8K50F3E, 4K00F1E, 4K00F1D (EUR) | |||||
| Power supply requirement | 7.5V DC nominal | ||||
| Current drain (approx.) |
Tx | 1.3A | 1.6 A (at 5 W) 1.4 A (at 4 W) |
||
| Rx | 520 mA /110 mA (Max. audio (internal SP)/Standby) |
520 mA /110 mA (Max. audio (internal SP)/Standby) |
|||
| Antenna impedance | 50Ω | ||||
| Operating temperature range (Radio specification) |
–30°C to +60°C; –22°F to +140°F (Radio specification) (USA/EXP) |
||||
| –25°C to +55°C (Radio specification) (EUR) |
|||||
| Dimensions (W × H × D; Projections not included) |
IC-F1100DS/D, IC-F2100DS/D: 52.2 × 111.8 × 29.4 mm; 2.1 × 4.4 × 1.2 in (With BP-280)IC-F1100DT, IC-F2100DT: 52.2 × 111.8 × 34.1 mm; 2.1 × 4.4 × 1.3 in (With BP-280) |
||||
| Weight (approx.) | IC-F1100D, IC-F2100D: 258 g, 9.1 oz (With BP-280 and MB-133) IC-F1100DS, IC-F2100DS: 266 g, 9.4 oz (With BP-280 and MB-133) IC-F1100DT, IC-F2100DT: 277 g, 9.8 oz (With BP-280 and MB-133) |
||||
Transmitter
IC-F1100DT/S |
IC-F1100D |
IC-F2100DT/S |
IC-F2100D |
||
|---|---|---|---|---|---|
| Output power (Hi, L2, L1) |
5 W, 2 W, 1 W | 5 W, 2 W, 1 W (400–470 MHz versions)4 W, 2 W, 1 W (All other versions) |
|||
| Maximum frequency deviation | ± 5.0 kHz (25 kHz), ±4.0 kHz (20 kHz), ±2.5 kHz (12.5 kHz) | ||||
| Spurious emissions | 70 dB minimum (USA/EXP) (350–400 MHz is included) | ||||
| 0.25 μW (≤ 1 GHz), 1.0 μW (> 1 GHz) (EUR/EXP) (Except 350-400 MHz) |
|||||
| Frequency stability | ±2.0ppm | ±1.0ppm | |||
| Audio harmonic distortion | 0.8% typ. (25 kHz), 0.9% typical (20 kHz), 1.0% typical (12.5 kHz) (at AF 1 kHz 40% deviation) |
0.7% typ. (25 kHz), 0.9% typical (20 kHz), 1.0% typical (12.5 kHz) (at AF 1 kHz 40% deviation) |
|||
| FM Hum and Noise (without CCITT filter) |
46 dB typ. (25 kHz) (EXP), 44 dB typ. (12.5 kHz) (USA/EXP) |
44 dB typical (12.5 kHz) (USA) | |||
| Residual modulations (with CCITT filter) |
51 dB typical (25 kHz), 49 dB typical (20 kHz), 45 dB typical (12.5 kHz) (EUR/EXP) |
54 dB typical (25 kHz), 52 dB typical (20 kHz), 48 dB typical (12.5 kHz) (EUR/EXP) |
|||
| FSK error | 5% maximum | ||||
| External microphone connector | 3-conductor 2.5 (d) mm (1/10 in)/2.2 kΩ | ||||
Receiver
IC-F1100DT/S |
IC-F1100D |
IC-F2100DT/S |
IC-F2100D |
||
|---|---|---|---|---|---|
| Sensitivity | Analog (at 12dB SINAD) | 0.24 μV typical | 0.24 μV typical | ||
| Analog (at 20dB SINAD) | –5 dBμV typ. emf (25/20 kHz), –2 dBμV typ. emf (12.5 kHz) |
–5 dBμV typ. emf (25/20 kHz), –2 dBμV typ. emf (12.5 kHz) |
|||
| Digital (at 5% BER) | –9 dBμV typical emf (0.18 μV typical) |
–8 dBμV typical emf (0.20 μV typical) |
|||
| Adjacent channel selectivity | 77 dB typ. (25 kHz), 75 dB typ. (20 kHz), 67 dB typ. (12.5 kHz), 59 dB typ. (digital) |
76 dB typ. (25 kHz), 75 dB typ. (20 kHz), 69 dB typ. (12.5 kHz), 58 dB typ. (digital) |
|||
| Spurious response rejection | 80 dB typical | ||||
| Intermodulation rejection | Digital | 71 dB typ. (USA/EXP), 74 dBμV emf typ. (EUR/EXP) |
70 dB typ. (USA/EXP), 74 dBμV emf typ. (400–470 MHz, EUR/EXP), 71 dBμV emf typ. (350–400 MHz, EXP) |
||
| Analog | 76 dB typ. (25 kHz, EXP), 75 dB typ. (12.5 kHz, USA/EXP), 69 dB typ. (EUR/EXP) |
77 dB typ. (25 kHz, EXP), 77 dB typ. (12.5 kHz, USA/EXP), 70 dB typ. (EUR/EXP) |
|||
| Hum and noise | (With CCITT filter) | 48 dB typ. (25 kHz, EXP), 43 dB typ. (12.5 kHz, USA/EXP) |
42 dB typical (12.5 kHz, USA) | ||
| (Without CCITT filter) | 51 dB typ. (25 kHz), 49 dB typ. (20 kHz), 46 dB typ. (12.5 kHz) (EUR/EXP) |
50 dB typ. (25 kHz), 48 dB typ. (20 kHz), 45 dB typ. (12.5 kHz) (EUR) |
|||
| AF output power (at 5% distortion) |
Internal SP | 1500 mW typical (With an 8Ω load) | |||
| External SP | 450 mW typical (With an 8Ω load) |
400 mW typical (With an 8Ω load) |
|||
| External speaker connector | 2-conductor 3.5 (d) mm (1⁄8 in)/8 Ω | ||||
All stated specifi cations are subject to change without notice or obligation.
Measurements made in accordance with TIA-603 (USA/EXP) or EN 300-086 (EUR).
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
| Standard | MIL-810 G | |
|---|---|---|
| Method | Procedure | |
| Low Pressure | 500.5 | I, II |
| High Temperature | 501.5 | I, II |
| Low Temperature | 502.5 | I, II |
| Temperature Shock | 503.5 | I-C |
| Solar Radiation | 505.5 | I |
| Rain Blowing/Drip | 506.5 | I, III |
| Humidity | 507.5 | II |
| Salt Fog | 509.5 | – |
| Dust Blowing | 510.5 | I |
| Immersion | 512.5 | I |
| Vibration | 514.6 | I |
| Shock | 516.6 | I, IV |
Also meets equivalent MIL-STD-810 -C, -D, -E and -F.
| Ingress Protection Standard | |
|---|---|
| Dust & Water | IP67 (Dust-tight and Immersion) IP55/IP54 (Dust and Water jets/Water resistant) |
All stated specifications are subject to change without notice or obligation.
Supplied Accessories
- Battery pack, BP-280
- Belt clip, MB-133
- Antenna
- Desktop charger, BC-213*
- AC adapter*, BC-242 (or BC-123SE/SUK/SV)
* May differ, or not supplied, depending on the version.
Icom IC-F1100DT – Brochure
Produk asli Kami distributor langsung ICOM. Harga murah dan berkualitas bergaransi tentunya. dapat di kirim ke seluruh wilaya indonesia.
Dalam pengiriman produk yang pelanggan beli, sebelumnya sudah kami cek untuk memastikan produk dalam keadaan baik dan siap kirim.