Extech CT20 Remote & Local Continuity Tester
One person operation for wire and cable testing
The CT20 is an electronic tool for electricians, alarm, cable installers and others who routinely need to check circuits for continuity and also identify cables and wires. It allows a single user to quickly identify and label two wires even when the wire ends are located in different rooms. It can accommodate test wire lengths up to 10,000-feet (3,000 meters), 26-gauge minimum. The CT20’s Remote Continuity mode allows the user to check continuity and to identify two or more cables/wires simultaneously.
Remote & Local Continuity Tester
Model : CT20
- A bright flashing LED and loud pulsating beeper indicate local continuity
- Remote continuity – with the use of the remote probe, it does not tie-up two people when identifying and labeling long distance wire/cable runs
- Flashing remote probe – Two lead, bi-color (red/green) LED probe allows a single user to identify up to three wires or cables at a time for correct labeling with only one trip to the other end location – cuts down on multiple trips back and forth
- Polarity verification – Drives a 20mA DC current pulse through the wires or cables under test to the bi-color remote probe; This enables the technician to identify each of the wires under test at the other end of the cable run and eliminates the possibility of false high impedance readings
- Lightweight/Pocketsize – clips on and hangs from the cable(s) under test without falling off
- Dims: 3.6×2.2×1.14″ (90x57x29mm); Wt: 9.2oz (260g)
- Complete with remote probe, test leads with alligator clips, 9V battery and pouch
Specification Extech CT20 Remote & Local Continuity Tester :
Specifications | Range |
---|---|
Power supply | 9 Volt Battery |
Beeper | 85dB beeper |
Battery life | Approx. 12 months with normal use. |
Continuity confirmation | Equal to or less than 2.0 K Ohms |
Continuity drive current: | Pulsed (2.0 Hz) 20 – 50mA at 10 Ohms and 2.0mA – 8.0mA at 1000 Ohms. |
Wire Verification Distance | 10,000 ft., 3,000 m (26 Gage min.) |
Fuse | 250V 0.5A fast blow |
Operating Temperature | -12 to 45°C (10°F to 113°F) |
Storage Temperature | -20 to 80°C (-4 to 176°F) |
Operating Humidity | 10 to 90% RH (non-condensing) |
Dimensions | 90 x 57 x 29mm (3.6 x 2.2 x 1.14”) |
Weight | 260g (9.2oz) |
Extech CT20 Datasheet
PT. JAVA SURVEY INDO adalah distributor dan Supplier Extech CT20 Remote & Local Continuity Tester di Jawa Barat & Jakarta dan juga menjual Brand EXTECH diantaranya Extech VB450, Extech SD900, Extech MO260, Extech MO57, Extech 3000A, Extech MN35, Extech PRC30, Extech RD200, Extech RF40, Extech RH35, Extech RF153, Extech RPM33, Extech RHT35, Extech SD500, Extech LT45, Extech FL700, Extech EX900, Extech DT500 dll. lihat produk kami lainnya di sini di sini KMT, SGI, SGM atau hubungi kami lewat Whatsapp 0821-3010-0456. atau via email [email protected] [email protected].